The Sony VPL PX15 data projector can be found in many classrooms on campus. With over 2000 lumens, it has the power to project well in a moderately bright room. The projector is also network capable, so in the future, it can be controlled over the campus network.

Complete data projection systems are available in several classrooms on campus. These systems are permanently mounted in the classroom, and allow the user to display computer data on a large screen without setting up equipment.

Click here to find classrooms with ceiling mounted data projection systems

To reserve a classroom with this equipment, contact the Registrar at 637-5252.
 
 

 

 

1.  Turn on computer and monitor using the appropriate power buttons.
2.  Make sure the remote control is turned on. The "off on" switch on the remote will turn the remote on and off. Turn on the data projector by pressing the green power button on the remote control.   You may point the remote at the projector or screen.
The data projector is set to fit the screen and is focused, no further adjustment should be necessary.
3. To project data or video played from the DVD-ROM on the computer, press the "input"button on the remote control once or twice until the system lands on the "computer 1"input (computer 1, video or S-video are options).
4. To project video from the VCR or DVD player, press the "input" button on the remote control until the system lands on the video "input"
5. To shut down the data projector using the remote control, press the green power button once. A message will appear on the screen asking if you wish to power off. Pressing the power button again will turn off the projector.