The EIKI 7070 CD player/tape recorder plays both CDs and cassettes in one machine. The built in speakers are sufficient for use in most classrooms, while the five headphone jacks may be used for private group listening. CDs can be recorded directly to cassettes in a few simple steps.
The CD player/tape recorder may be reserved for use anywhere on campus. Two EIKI 7070 machines are located in the Giere Audiovisual Center of Oesterle library for public use.
Click here to request the CD/Tape Recorder
1.Press the "push open" spot on the CD door to open the CD tray. Insert a CD into the unit. Close the door by pressing on the "push open" spot.
2.Using the selector switch, select the CD format.
3.Press play to listen to the CD. Tracks on the CD can be found by pressing the search and skip buttons. Other functions include: Fast forward and reverse, repeat play, and random play.
4.Volume and audio quality may be adjusted using the volume, balance, tone, and pitch controls.
5.To remove the CD, press stop/clear, then press the "push open" spot on the CD door to open the unit.
To listen or record to an audio cassette:
A.Press the Stop/Eject button on the cassette side of the unit to open the cassette door.
B.Insert a cassette into the unit, making sure the thin side of the tape is inserted first. Push down on the door to close it.
C.Using the selector switch, select the Tape function.(see photo above)
D. Use the tape function buttons to play or cue the tape.
E.Volume and audio quality may be adjusted using the volume, balance, tone and pitch controls.
F.To record to cassette, insert a microphone into the MIC jack. Press record and begin
G.To record a CD to cassette, insert a CD and cassette into their individual compartments. Use the selector switch to select CD. Press the Record button. The CD will automatically start in a few seconds. The CD player will automatically stop at the end of the CD. Press Stop/Eject to stop the recording.